How To Close A Gerber Knife – Safely And Easily

How to Close A Gerber Knife

The Gerber knife is a popular survival knife renowned for its versatility and strength. Its wide range of uses makes it a must-have for any outdoorsman or hunter. However, if not handled with care, it can be dangerous. It is important to know how to properly close it in order to keep oneself and others safe. Closing the knife correctly will help to maintain its sharp edge and ensure its proper functioning.

Today, we will show you the correct and quick way to close a Gerber knife. We will also cover the safety measures you should consider when using a knife of this type.

How to Close a Gerber Knife: Step-by-Step Process

First, identify the type of Gerber knife you are using. Different types of knives have different mechanisms for locking and unlocking, so it is important to know the model of your knife before attempting to close it.

  • Step 1: Locate the unlocking mechanism. Depending on the make and model, you will find one of two types of buttons or tabs. These can either be a locked position tab or a slide-release lock.
  • Step 2: Unlock the blade. To unlock the blade, press the tab or pull the slide-release lock. This will allow the blade to be released from the locked position.
  • Step 3: Grip the blade. Use your forefinger and thumb to hold the blade in one hand while using your other hand to gently pull the blade closed.
  • Step 4: Snap the blade closed. Once the blade is closed, it will snap into place. Be sure to keep your fingers away from the blade as you are closing it.
  • Step 5: Lock the blade. Depending on the type of knife you have, you will either press the tab or slide the lock to the locked position.
  • Step 6: Test the blade to make sure it is locked. Gently try to open the blade to ensure it is locked.

Gerber Knife Safely Tips

Whether you are opening or closing the knife, following proper techniques can help prevent accidents and ensure a smooth operation. Here are some essential safety tips to keep in mind when handling a Gerber knife:

When opening your Gerber knife, ensure a secure grip on the handle with your thumb on the blade. This will provide stability to prevent the blade from flipping back. With your free hand, press the thumb stud or the stud in the handle of the knife, and then push the blade into the open position. Doing this will guarantee that your knife is opened safely and securely.

When closing your knife, make sure to keep your fingers away from the path of the blade. To do so, firmly hold the handle of the knife in one hand while placing the other hand on the spine of the blade. Then, use the thumb stud to gradually slide the knife into the closed position until it is securely closed. This will help to ensure your safety and protect the blade from any damage.

Be mindful of your environment when opening and shutting your Gerber knife. Ensure that no one else or anything is in the trajectory of your blade. It is also prudent to keep the knife in a place that is out of reach of little ones.

How To Close A Pocket Knife With No Button

Closing a pocket knife without a button or locking mechanism requires a different approach than knives with such features. Here is a step-by-step guide to help you master this skill:

1. Grip the Knife: Hold the knife handle firmly with your dominant hand, ensuring a secure grip while keeping your fingers away from the blade.

2. Locate the Pivot Point: Identify the pivot point where the blade connects to the handle. This is usually located near the base of the blade.

3. Keep Your Fingers Clear: Ensure that your fingers are clear of the blade’s path and are positioned on the handle, away from any potential harm.

4. Apply Gentle Pressure: Using your thumb or index finger, apply gentle pressure to the back of the blade near the pivot point to help release the blade from its open position.

5. Gradually Close the Blade: While maintaining the pressure on the back of the blade, slowly fold the blade back into the handle. Take your time and exercise caution to avoid any accidental slips.

6. Check for Full Closure: Once the blade is folded back into the handle, double-check that it is fully closed and securely in place. Ensure that the blade is not sticking out or partially open.

Prioritize safety and take your time when performing this action. If you are uncertain or uncomfortable, it is advisable to seek guidance from an experienced person or consult the manufacturer of the knife for specific instructions.

How To Sharpen A Gerber Knife

A Gerber knife can be sharpened with a whetstone, a diamond-coated sharpening rod, or a ceramic sharpening rod. Alternatively, for easier sharpening, you can use a pre-made Gerber sharpening stone or a sharpening block. I would suggest using a whetstone (typically with coarse, medium, and fine grit) to sharpen your Gerber knife because the stone gives you much more control over the sharpening angle.

Before getting started, make sure you have all the materials you need: a Gerber knife, whetstones, a container of water, and a towel. Begin by submerging the whetstones in water for about 10 to 15 minutes. This allows the stones to become properly saturated, preventing them from becoming blocked, and it helps to lubricate the blade during sharpening.

Once the stones have been adequately soaked, it is time to begin. Lay out a towel on the work surface. Take your knife and hold it with the blade facing away from you. Position the heel of the blade at a twenty-degree angle on the coarse-grit stone. This stone is responsible for reshaping and sharpening any dull or damaged areas of the blade.

Maintain a consistent angle, apply light pressure, and slide the blade across the sharpening stone, moving from the base to the tip in a sweeping motion. Make sure to keep the motion steady and controlled, allowing the entire edge of the blade to make contact with the stone. Alternate strokes between each side of the blade, repeating this process until you have achieved a uniform edge along the length of the blade. Ensure you spend an equal amount of time on each side of the blade to maintain balance.

Once you have finished sharpening, rinse the knife thoroughly and dry the blade completely. Inspect the knife under bright lighting to confirm that the edge has been honed to the desired sharpness. If necessary, you can repeat the sharpening process, focusing on specific areas that may require further attention.

Gerber Knife Pocket Clip Replacement

To replace the pocket clip of your knife, start by flipping the knife over and placing it on a flat surface. Using a small flathead screwdriver or pocket clip removal tool, carefully unscrew the clip and remove it from the knife handle. Depending on the type of screw bit used, you may need a Phillips head, Torx head, or another bit to unscrew the clip. To determine the type of bit needed, use an awl or other thin tool to probe the head of the screw. Once the screw has been removed, you can install the new pocket clip and secure it using the appropriate screwdriver.

Next, take your new pocket clip and place it on the handle of the knife. Line up the holes on the clip with the ones in the handle and insert the screws, using the same screwdriver or screw bit as before. Make sure the pocket clip is secure and doesn’t move when you fidget with it. Finally, take a few drops of oil and lightly coat the parts of the pocket clip where it meets the handle. This will help keep it from becoming corroded and keep it in place.

Now you’re finished! To prevent the screws from becoming loose, check them after use to make sure they are still secure. Additionally, keep your knife oiled and cleaned to ensure it is functioning properly. Taking proper care of your knife will help extend its lifespan and ensure a safe and efficient cutting experience.

Gerber Knife History

A Gerber knife is a versatile folding knife commonly used by outdoor enthusiasts and other everyday users. Its distinctive design features a dual-blade folder made from stainless steel, with a thicker, grooved back spacer, all of which are usually branded with the manufacturer’s mark. It is commonly associated with the North American outdoorsman due to its frequent inclusion in multiple tool sets and its preferred usefulness in activities such as fishing, hunting, campfire cooking, and more.

The company originated in 1939 when renowned knife maker Joseph Gerber began producing then-unique multi-bladed folding knives under the name of the Gerber Knife Company. In 1966, the Gerber Mark II was introduced, which would become one of the most iconic knives that Gerber ever produced. During the Vietnam War, the Mark II was the preferred knife of US soldiers because it’s sturdy construction and varied uses meant that it could perform a range of camping and survival tasks.

Today, these knives remain popular and widely available. Many of the original features of the knife have remained relatively unchanged, as the design philosophy of “form follows function” has not wavered over time. This is why these knives remain a favorite among many outdoorsmen. Aside from the classic features, Gerber has also implemented several new design elements in the modern iterations, providing users with a more ergonomic experience in addition to the traditional ruggedness.

Gerber Knife Model Identification

The model of the Gerber knife differs in size, blade construction, handle design, and other features such as innovative technologies and patented blade shapes.

Many of their popular folding knife models, such as the Paraframe and Prodigy, have blade shapes that are hard to miss. There are several distinctive folding locking mechanisms, such as the popular frame lock, which can also be helpful for identification. Also, the handle is often branded with the company insignia as well as the model name or number. For larger fixed-blade knives, the model name is often repeated on the sheath.

For example, the Gerber Bear Grylls Ultimate Knife has a model number of 31-000752, and the Gator Premium Folder has a model number of 31-001956.

Frequently Asked Questions & Answers

What is the best technique for closing the Gerber knife?

To close the knife, grasp the handle with your dominant hand and hold the spine of the blade with your forefinger and thumb to keep your fingers away from the blade when sliding out the locking mechanism and closing the handle.

Can I close my Gerber knife with one hand?

Yes, you can close your Gerber knife with one hand by using the thumb of that hand to push the lock button forward while pushing the blade back into the handle with the other.

How do I know if my Gerber knife has been properly closed?

You can tell if your Gerber knife has been properly closed if the blade is securely tucked into the handle. If there is any wiggle or play in the blade, then the knife has not been closed correctly.

What should I do if the Gerber Knife blade is stuck?

If the blade is stuck, try gently shaking the knife while slightly flexing the blade back and forth to free the locking mechanism. If it still won’t close, then try using a steel tool or a paperclip to gently pry the locking mechanism back into place before attempting to close the blade. For extreme cases, consulting a professional knife sharpener may be necessary.

Is it ok to close a Gerber knife if the spring is broken?

No, it is not safe to close a Gerber knife if the spring is broken. A broken spring can be highly dangerous, as it can cause the knife to close unexpectedly and without warning, potentially leading to serious injuries. It can also cause other parts of the knife to become damaged. Therefore, it is important to inspect your knife for any signs of wear and tear before using it.

Conclusion

After following all of the directions, you can now confidently close your knife! All that remains is to remember the steps and practice closing and opening the knife so that next time you won’t have to think twice about how to do it. Please be aware that a lack of care when closing your knife can lead to injury, so be sure to take the necessary precautions and follow all of the steps listed above.

You Might Also Like

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top